氢气纯化装置
Hydrogen purification devices
以工业普氢为原料，通过催化除氧，冷凝和吸附两级干燥，以及过滤除尘，可以除去氢中杂质氧，水汽和尘埃颗粒等，获得高纯氢气。
原氢接如原气阀，原氢流量计，除氧器，进行催化除氧。再经冷却器冷凝降温，用冷凝水使气体降温，进入汽水分离器，分离水分。
此时气体可以分别经阀门，进入1组吸附器或2组吸附器吸附干燥，然后经阀门，再经过滤器，由纯氢出口送使用地点。
该复式流程，在一只吸附器工作的同时，另一只吸附器可以进行再生处理，再生用气取部分干燥纯氢，通过再生流量计，阀门送1组吸附器或2组吸附器，加热再生吸附剂，再生废气经阀门进入汽水分离器放空，水分经阀门排出。
Hydrogen purification devices
Poor industrial raw hydrogen by catalytic oxygen, two adsorption condensation and drying, as well as dust filter can remove impurities in hydrogen oxygen, water vapor and dust particles, to obtain high-purity hydrogen.
Original hydrogen pick as the original valve, flowmeter original hydrogen, oxygen, a catalytic oxygen. Then condensed by cooler cooling, cooling the gas with condensate into the steam separator, water separation.
In this case the gas can respectively through the valve into the Group 1 or Group 2 adsorber adsorber adsorption drying, and then through the valve, and then through the filter by using pure hydrogen outlet delivery locations.
The duplex process, while an adsorber work, another adsorber regeneration treatment can be regenerated with pure hydrogen gas drying take part, through the regeneration flow meters, valves send a group of the adsorber or adsorber group 2, heating sorbent regeneration, regeneration of exhaust gas through the vent valve into the steam separator, water is discharged through the valve.
|
